SL-004HIon gun is a kind of professional equipment which can provide strong ionic wind to objects to eliminate static electricity by hand..Designed for high-volume dust removal and neutralization of static electricity.Used to remove dust attracted by static electricity.A brass case was added to the gun head.,Make the head of this kind of air gun not easy to burn out and break..Plastic gun body with adjustable wind speed,Not only is it lightweight, but the gun body is free to control the size of the wind.,It belongs to a kind of static electricity removal product using compressed gas series..Easy to install,Stable work,Strong wind speed,Elimination of electrostatic characteristics of fast speed.
Action principle
SL-004HIon guns can produce a large number of positive and negative charged air masses.,High-speed blow-out of compressed gas,You can neutralize the charges on an object..When the charge on the surface of an object is negative,It attracts positive charges in the air stream.,When the charge on the surface of an object is positive,It will attract negative charges in the air flow,So that the static electricity on the surface of the object is neutralized,To achieve the purpose of eliminating static electricity,High-speed compressed air can also blow away stubborn dust deposits on objects..
Ionization device:Ionization Devices Under Low Current and High Voltage Produced by High Voltage Generator,Forming a stable high-strength electric field,Ionizing air to form ionomers,Brought out by high pressure air flow to the object surface,To neutralize static electricity and dust removal.
Product characteristics
1．Rapid neutralization of static electricity.
2．Large coverage area of ionic airflow.
3．Wide range of wind regulation.
4．Air gun has good grounding protection.
technical parameter
Service voltage: 4600V 50Hz
Consumption current: ≤350uA
air pressure: 40-70PSI
weight: 0.55kg Tape line
Operating temperature: 32oF(0oC)~122oF(50oC)
Airflow velocity: 10m/sec
Ozone volume: 0.003PPM (Before the wind gun6Inch measurement)
De-static time:
|
Distance of tester |
Centerline |
|
60mm |
0.7s |
|
90mm |
0.9s |
|
150mm |
1.2s |
Operation instructions:
SL-004HIon gun should be equippedSL-007High Voltage Generator Used Together.
1,Insert the end of the connecting line of the air gun into the high-voltage output jack of the high-voltage generator,Rotate clockwise to the end.
2,Connect the grounding wire of the air gun to the grounding post on the outside of the high voltage generator,After confirming good grounding,Insert the plug of the high voltage generator into the socket with grounding wire(Pay attention to the use voltage of high voltage generator).
3,Air gun connected with compressed air,Turn on the power supply of the high voltage generator and it will work..
Đánh giá
Chưa có đánh giá nào.